Re: '92 S4 headlight protection

["Arun Rao" <rao@frisbee>]

On Jun 17,  6:09pm, Pierre Villiard wrote:
> Subject: '92 S4 headlight protection
>
> [ text/plain
>   Encoded with "quoted-printable" ] :
Hi Audians,
>
>         Apparently it's not possible to find in Fredericton, New Brunswick,
> the thick 3M stuff for lights recently mentioned by Peter Henriksen.
[ ...]
> ... owing is a good idea. What if
> the upper part of the Lexan piece was bent and velcroed on the headlight
> casing, i.e. under the hood, and the lower part inserted just in front of
> the rubber strip around the bottom of the headlight? That way, no velcro
> would show. Any input on this?


	This is more or less what mine are, except that there's no
	velcro. I'd be happy to send you a picture of mine if you'd
	like to look at the design.  The only thing which holds them
	in place are apparently rubber strips on the underside, and
	the slight springiness of the Lexan.

	-Arun

	PS: Mine are made by Wade, and were purchased at a Colorado
	Audi dealership -- are you sure your dealer can't find you
	a pair?


--
Arun Rao
Scientist
Pixar Animation Studios
1001 W. Cutting Blvd.
Pt. Richmond, CA 94804
(510)215-3526