Brake Tool....

[Michael LaRosa <76761.1444@CompuServe.COM>]

I had a similar problem with a Saab 900.  I made a tool that was
basicly (No laughing...) a metal book end with 2 holes drilled in 
it and a couple of bolts going through it.  The bolts were situated to line
up with the notches.  So the nut would be inserted into the notches
and you could turn the piston back into the caliper.

The book end was in the shape of an 'L'  with the 2 bolts on the lower
horizontal end.  It worked great!!

If you'd like I could draw a picture and fax it to you.

Regards,

Mike L.

==================================================
Mike LaRosa		INCASES Engineering N.A.
Manager,			20 Trafalgar Square
EDA Technical Support	Suite 403
603-881-5392		Nashua, NH
603-881-5467 Fax		03063
E-Mail:  76761.1444@compuserve.com
==================================================