Re:I5 Tubular Headers

[mike tipton <mtipton@netten.net>]

All of the "tubular headers for the I5 were made by a company in Cal.
called "Red Lion Racing" or "Eurorace".  They made about 20, sold about
5, and then Ivor from TAP, bought the rest.
 So Ivor now has a monopoly on the only I5 tubular headers in 
existance.$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

>From experience(I have one of the original headers from Eurorace) I
can tell you this header is nicely built, trickey to install, and doesnt 
last long. Unless you get it "ceramic coated" with Jet Hot.
Its a three piece design(only way to install it) and it lacks several
features that mould make it a "Great" header.  It seems it was put
together rather quickly, and quality control wasnt a factor.
Plus its a pain to install or remove, and the fit isnt what you'd 
expect from such a pricey piece!

Go with a I5 4KQ manifold and down pipe, have them ported a little,
then coated, and you retain ease of maintanence, and duribility.
Power gains are equal, especially on a stock motor.  

The main advantage for the tubular header would be in the high RPM 
range.

The 4KQ setup gives you better torque in the lower RPM range, and flows
well in high RPMS for a stock naturaly aspirated motor.

                                    M