Re: 20v spark plug replacement

[Porsray@aol.com]

On my 20V Coupe, I use a craftsman 5/8" spark plug socket.
The more normal 13/16" won't fit.

By the way, depending on the make of spark plug you buy, the 
manufacturer's cros-conversion manual might list a 13/16" hex plug
for this vehicle (they did for my Coupe), but it won't fit in thee spark
plug well.  Check before purchase.

Ray Calvo (porsray@aol.com)
1990 Coupe Quattro


In a message dated 96-09-19 13:06:07 EDT, you write:

<< -----------------------------
 
 From: mallick@orion.crd.ge.com (John Mallick)
 Date: Thu, 19 Sep 96 10:10:36 EDT
 Subject: 20v spark plug replacement
 
 I was home sick yesterday, so I decided to take a peek at the plugs
 in the '91 200q to see if they were the cause of the misfire at high
 boost (which I am still chasing).  I took out my brand new Sears
 locking extensions (so as not to loose the spark plug socket) and
 *whoa*, the plug socket doesn't fit in the hole in the head.  Hmmm...I
 remembered that I had a smaller spark plug socket which was used on
 some newer GM plugs, so I put it in place and *whoa*, it doesn't fit
 down the hole either (but it is close).
 
 So...what spark plug socket do I use for looking at these plugs?  Is
 it an Audi-only part?  Am I left with using the handle end of the lug
 nut wrench (which is outfitted for plug removal)?
 
 Inquiring minds want to know.
 
 John Mallick
 '91 200q
  >>