RE:wiper stop.

[rawaudi@frugal.com (RWheeldon)]

>I have a 1991 V8.

As best as I can assertain from the wire diagram for my '90 US V8Q, the
switch for returning the wipers to the park (standby) position is in the
wiper motor.  When I push the wiper lever down for a single wipe, the
intermittent wipe relay never gets actuated.  However, power to drive the
wiper to the parked position does go through the relay, between contacts
42/31b and 40/53e.  These are the normally closed contacts on the
intermittent relay.

If you need a copy of the wire diagram and you have a FAX, give me the FAX
number & I'll send it.

Hope this helps!

Bob Wheeldon
'90 V8Q
Principal Engineer
Boeing Commercial Airplanes
robert a wheeldon@boeing.com
rawaudi@frugal.com