Re: alternate method for removing crank pulley

[i6941TB@gnn.com]

>> << My mechanic thought this one up - attach breaker bar with socket
>>  to the pulley nut, handle on the ground.  Crank the starter.
>>  Is he nuts or is this a great idea?
>>  --  >>

Phil Payne justfully replied to this idea by saying:

>He's nuts.
>I can think of a _lot_ of things better than this idea.

I was observing this polemic waiting for somebody to mention a bloodless and 
quick way to remove that monster bolt, that I always use:

1. Remove the Hall Sensor (two 5mm allen bolts, LH bell housing)
2. Insert a wide flat screwdriver in the opening and stick it in between the 
flywheel teeth (or a smallest pry bar from a std. 4-piece set)



Igor Kessel
the sweetheart: 200TQ, chipped and MOMO'd through out,
in Tornado "arrest-me-officer" Red;
the ex: 5000s, the EE's nightmare
Phila PA, USA
i6941TB@gnn.com