[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 1983 URQ Springs

To: Bryan Gunn <bgunn@voicetek.com>
Subject: Re: 1983 URQ Springs
From: "John V. Corbishley" <104635.3606@compuserve.com>
Date: Thu, 24 Oct 1996 16:22:16 -0400
Cc: "(unknown)" <quattro@coimbra.ans.net>
Sender: owner-quattro@coimbra.ans.net

Thanks for the input Bryan.  I didn't mention it, but I replaced the old
shocks with Bilsteins all around at the same time.  The ride height is not
drastically lower, about 3/4" as the vendor indicated it would be.  He said
any greater lowering would be a problem.  My mechanic's concern is that the
springs will be able to shift in their "cups" if they are of a smaller
diameter??

What is the consensus? Cut the bump stops or not?

Prev by Author: Re: 1983 URQ Springs
Next by Author: Re: 1983 URQ Springs
Prev by thread: Re: 1983 URQ Springs
Next by thread: Re: 1983 URQ Springs
Index(es):
- Author
- Thread