Re: 5k cstq -- jumped timing??

[shields@tembel.org (Michael Shields)]

> There is a zero there.....  You smack that zero dead center in the trapezoid
> window...  At that point you should see the inner and outer marks of the
> distributor line up to tdc (dist tdc), and follow the top of the cam cover to
> either a dot (indentation) or a line (I've seen either, depending on gear
> supplier I would guess).....

But when checking this with a timing light, you should not see either
the cam dot or the flywheel zero line up, because the strobe flashes at
ignition, BTDC, right?  What is the line to the left of the zero for?
-- 
Shields.