[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Check Bulb warning light



>So now I have my relays in for the Euro lights, but the check bulb
>warning light is on in the "information center" on the dash.
>
>Any idea why this is and what to do about it? My guess is that it's
>something about the load through the bulb not matching something else.
>Can I just fool it permanently? That's one warning I think I can figure
>out for myself...

This is a easy one Peter......

The Relay is pulling just enough load that the Headlight out autocheck 
circut is seeing a out-of-balance condition.  The solution either run 
relays on each lamp (Solution on my car) or just run another length of 
wire from the relay to the unconnected headlight.

Later!


Eric Fletcher
'87 5KCSTQIA2RSR2B
St. Louis, MO

STEADIRIC@aol.com