Re: 91TQ 20V Brakes

[Dave Wright <davewrit@execpc.com>]

At 11:24 PM 11/20/96 -0800, George wrote:
>My 1991 TQ 20V has developed a front-end shimmy when I apply the brakes. 
> My mechanic says the rotors are warped which I suspected, but he also 
>says that Audi actually recommends that the entire front brake assembly 
>be replaced because of all the problems they have had.  He says that 
>will run about $2,000; however, he says that the brake assembly from a 
>'90 or '91 non-20V or non-V8 will do the job.  Before I begin searching 
>wrecking yards, I just would like a reality check.  Has anyone had 
>experience with this?
>
>Thanks.
>
>George Simmons
>
>

Yes. At 80,000 I had them clean up the rotors and re-pad, against the
dealers recommendation. I needed new brakes at 125,000 and had another light
clean-up of the fronts done. Next time brakes are put on, I will need new
front rotors. I am glad I did what I did!