Re: Speedo and Horn pad

["Mark Pollan" <Mark.Pollan@MCI.Com>]

Mar:

On my '86 5KCSTQ you just pull on the corners. The horn pad is held in
place by a ball-and-socket type arrangement. Very similar concept to
the snap in trim clips just a slightly different design. I wouldn't
recommend you do this when it is too cold out. The ball on a couple of
mine didn't come out of the socket the socket just broke off. No
biggie though. The sockets are cheap (<$1 US) and are held on by a
small bolt.

HTH

Mark Pollan, '865KCSTQ 211K miles