[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
RE: Have I warped a rotor?
----------
From: owner-quattro@coimbra.ans.net on behalf of Michael Shields
Sent: Sunday, February 16, 1997 11:49 PM
To: quattro@coimbra.ans.net
Subject: Have I warped a rotor?
>What are the symptoms of a warped brake rotor? Would they be pedal
>pulsations under moderate pressure?
>I am running OEM rotors with Metalmaster pads installed 1996-08-10 @
>108542 (currently at 117k and change). It seems to me that rotors >should
>last longer than 8500 miles.
>What causes rotors to warp? Did I do something wrong in the brake
>job or am I just driving too hard? If it's the latter, should I go to
>cross-drilled rotors and if so from who? (It seems a bit silly to have
>drilled rotors in the front and drums in the back but if that's what
>it takes...)
>Shields.
When you finished your brake job and put the wheels back on the car, did you
torque them? If you didn't, this would cause the rotors to warp. Every time
I install the wheels on my car I make sure that they are torqued to
95 ft. lbs all the way around.
Fellow Quattro fanatic,
Audiman, Stefan Bendevis