[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Ign. Sw. Mod./Steering column
You remove the steering wheel, and all of those turn signal/ wiper
switches. Then the aluminum housing has few bolts in it. It then
slides off.
To get the lock cylinder, you have to drill a 3mm hole somewhere in
the aluminum housing. You then stick a pin or something in the hole
to release a hidden spring clip. Bentley manuals don't always tell
you where that is. Try a Haynes. You have to have the manual,
because it gives you the exact location to drill this hole.
If you just want to replace the ignition switch, I don't think you
have to pull the lock cylinder. I THINK it comes out from behind.
It's been a few years since I did that. Anyone else know?
Chris
______________________________ Reply Separator _________________________________
Subject: Ign. Sw. Mod./Steering column
Author: ampj@tiac.net at Internet
Date: 2/18/97 12:29 AM
Is there anyone out there right now who knows about removing the
ignition switch module or knows how to get to the steel housing around
the ignition switch?
TIA, Allan
Received: from igw.fmc.com (128.254.113.66) by ccgate.fmc.com with SMTP
(IMA Internet Exchange 2.1 Enterprise) id 0007289C; Tue, 18 Feb 97 00:47:47
-0600
Received: from coimbra.ans.net by internet.fmc.com with SMTP id AA06082
(InterLock SMTP Gateway 3.0 for <christopher_bender@fmc.com>);
Tue, 18 Feb 1997 00:48:14 -0600
Received: (from majordom@localhost) by coimbra.ans.net (8.8.5-q-beta3/8.7.3) id
AAA07643 for quattro-outgoing; Tue, 18 Feb 1997 00:28:09 -0500 (EST)
Message-Id: <33093E4D.99D@tiac.net>
Date: Tue, 18 Feb 1997 00:29:49 -0500
From: Allan Jones <ampj@tiac.net>
Reply-To: ampj@tiac.net
X-Mailer: Mozilla 3.0 (Win95; I)
Mime-Version: 1.0
To: quattro@coimbra.ans.net
Subject: Ign. Sw. Mod./Steering column
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-quattro@coimbra.ans.net
Precedence: bulk