[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Wiring remote locks to Central locking system

To: Dan Simoes <dans@ans.net>
Subject: Re: Wiring remote locks to Central locking system
From: Alexei M Voloshin <Alexei.M.Voloshin-1@tc.umn.edu>
Date: Thu, 20 Feb 1997 09:39:48 -0600 (CST)
cc: Stefan Bendevis <Audiman1@msn.com>, quattro@coimbra.ans.net
In-Reply-To: <199702201435.AA24922@interlock.ans.net>
Sender: owner-quattro@coimbra.ans.net


When you unlock the driver's door from the inside by pulling up on the 
tab, all the doors unlock. Similar for locking. Is it an electrical 
switch/sensor which is responsible for sensing whether the driver's door 
is locked or unlocked?? (I would assume it is)
If it is, you may not need an actuator. Just tap into the wires using 
relays. 

Alex

> 
> You will need to add an actuator for the driver's lock.
> The alarm will then trigger the actuator, setting off
> the vacuum locks on the other doors/trunk.
> 
> | Dan |
> -- 
> Dan Simoes			          dans@ans.net
> ANS 				http://coimbra.ans.net/dans.html
> 100 Clearbrook Road  			(914) 789-5378 (voice)
> Elmsford, NY 10523			(914) 789-5310 (fax)
>

Follow-Ups:
- Re: Wiring remote locks to Central locking system
  - From: Dan Simoes <dans@ans.net>

References:
- Re: Wiring remote locks to Central locking system
  - From: Dan Simoes <dans@ans.net>

Prev by Author: Re: Auto maint questions???
Next by Author: Re: A8
Prev by thread: Re: Wiring remote locks to Central locking system
Next by thread: Re: Wiring remote locks to Central locking system
Index(es):
- Author
- Thread