Re: Wiring remote locks to Central locking system

[Dan Simoes <dans@ans.net>]

> When you unlock the driver's door from the inside by pulling up on the 
> tab, all the doors unlock. Similar for locking. Is it an electrical 
> switch/sensor which is responsible for sensing whether the driver's door 
> is locked or unlocked?? (I would assume it is)
> If it is, you may not need an actuator. Just tap into the wires using 
> relays. 

You need an actuator, at least on the 4kq.  There is no way
for the driver's lock mechanism to lock/unlock except
for the key.  By using an actuator, the alarm signal will
unlock all 4 doors.

| Dan |