Re: Broken Injector Sleve on A100 2.2.

[Angela Dupin <dupina@crisny.org>]

if indeed it is rounded, try a plumbers/broken bolt extractor of the 
proper size.  and if no-go...remove the intake manifold; split the sleeve 
with a die grinder with burr or a Dremel with two opposite axial slits to 
the root diameter of the treads and the sleeve will virtually fall out.

Good luck,
Phil
> 
> In message <199703142239.WAA27747@richmond.premier.co.uk> Mike Walder writes:
> 
> > The problem is the sleve for injector 1 is broken, and I cannot remove it.
> > I have tried with a 12mm hex socket, and have probably rounded it.  Any
> > ideas or past expreiences that might help?
> 
> Find a plumber.
> 
> (Seriously.  Ever tried to undo a washbasin tap from below?  Plumbers have an 
>  amazing variety of gadgets for grabbing hold of cylindrical objects and 
>  twisting.  You probably need a Monument 413 810 Universal Basin Wrench - and 
>  someone who knows how to use it.  It's neither easy nor intuitive.) 
> 
> --
>  Phil Payne
>  phil@sievers.com
>  Committee Member, UK Audi [ur-]quattro Owners Club
>