stuckup studs? -Reply

[Gross Scruggs <GScruggs@wposmtp.nps.navy.mil>]

Dan, if you have any threads left, put two nuts on the stud and tighten them
solidly and try to unscrew the inner one.  Doing this you have effectively
'welded a nut' onto the stud.  Use good penetrating oil, let soak.  Best I've
found is called 'Kroil' by Kano Industries in Nashville.

If all threads are gone, a possibility with vice grips, use penetrating oil and
and a pipe wrench.  Actually two pipe wrenches 180 deg from each other is less
likely to bend said stud.  

Regards,  Gross
"Finger out, Foot down"