[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: More, Clear coat repairs
> I have clearcoat peeling off on my drivers side door on my 4k. I looks
> real strange. Is there anyway to fix this?
If the bonding between the lacquer and the basecoat has failed,the only way is
to strip down to the base coat,or even bare metal,re prime,and rebase ,followed
by a relacquer.
De laminating of the clear from the base is usually caused by bad prep,or poor
materials.I am afraid that no "easy fix" exists.We often see badly resprayed
cars where the remedial work,done properly,is more than the cars actual value.I
always examine secondhand cars carefully,checking for delamination,as it is
such a $#@*$ to fix.At least it sounds localised in your case.
--
Best Regards,
Chris Wilson
http://www.maximun-bhp.u-net.com
mailto:chris@maximum-bhp.u-net.com