[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: MAC-10 connector wires

To: piotr@Exabyte.COM
Subject: Re: MAC-10 connector wires
From: orin@wolfenet.com
Date: Thu, 17 Apr 1997 18:21:51 -0700 (PDT)
Cc: quattro@coimbra.ans.net
In-Reply-To: <9703178613.AA861321622@smtplink.exabyte.com> from "piotr@Exabyte.COM" at Apr 17, 97 04:44:38 pm
Sender: owner-quattro@coimbra.ans.net

>      I just started looking closely at my MAC-10 unit connector and noticed 
>      2 wires which appear to have been cut/disconnected. I currently don't 
>      have Bentley manual, so I was wondering if somebody on the list with 
>      manual for 86-88 5000TQ could look up what signals these wires carry.
>      (Below is rough drawing of connector, with wire positions/color 
>      indicated).

I believe one is for CA emissions and the other is for automatic transmission.
They should be cut on the 86+ 5000TQ, CA cars should have one of them
uncut.  I may have info on which is which at home...
BTW: the AT transmission wire causes the computer to lower boost when it
is connected since the poor AT transmission isn't strong enough?!

Orin.

References:
- MAC-10 connector wires
  - From: piotr@Exabyte.COM

Prev by Author: Re: Wheel bearings
Next by Author: Re: de plane, de plane
Prev by thread: Re: MAC-10 connector wires
Next by thread: Re: MAC-10 connector wires
Index(es):
- Author
- Thread