[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: MAC-10 connector wires



>     Hi everybody!
>     I just started looking closely at my MAC-10 unit connector and noticed 
>     2 wires which appear to have been cut/disconnected. I currently don't 
>     have Bentley manual, so I was wondering if somebody on the list with 
>     manual for 86-88 5000TQ could look up what signals these wires carry.
>     (Below is rough drawing of connector, with wire positions/color 
>     indicated).
>     
>                                2nd wire from right,top row(brown/white)
>                                   |
>      |  |----------------------------|
>      |--|                            |_______
>      |--|                            |-------
>      |  |____________________________|
>                ^
>                |
>            6th wire from left, bottom row(brown/blue)
>     

Auto trans wire's... It's fine.


Later!


Eric Fletcher S.O.C.
'87 5KCSTQIA2RSR2B
St. Louis, MO

STEADIRIC@aol.com