[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Removing badges
In message <v01530508af8109ef4b01@[194.134.3.14]> tnas@euronet.nl (Tom Nas) writes:
> >Hey, was wondering if anyone knows how to remove the Audi logo on the
> >rear-end of the car located on the trunk. I am wanting to re-paint mine
> >black again. Years of sun and wax build-up around the lettering don't
> >look to pleasing to me. I guess it's just from the good-old sun here in
> >Florida. Any suggestions would be great!
>
> It's in the archives, but: use a hair dryer or paint stripper on 'low'
> setting: these things are stuck on with double-sided tape. Caveat: use
> gloves for taking them off after heating- BTDTburnt my fingers.
I just wrapped a steel rule in a very soft cloth and gently lifted the badge
with an old wood chisel using the rule as a fulcrum. Just exert some force and
wait - they come away very slowly. Patience is a virtue.
--
Phil Payne
phil@sievers.com
Committee Member, UK Audi [ur-]quattro Owners Club