[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: better braking for the 90

To: todd candey <tcandey@wwa.com>
Subject: Re: better braking for the 90
From: "J. Stevens" <jstevens@kaiwan.com>
Date: Wed, 07 May 1997 00:46:23 -0700
Cc: quattro@coimbra.ans.net
Sender: owner-quattro@coimbra.ans.net

At 03:20 PM 5/6/97 -0700, you wrote:

>The hot set-up is the girling 60's and the 288mm rotor's, this is a
bolt-on, but it will require 
>15" rims.

What would such an upgraged entail?  The rotors are straightforward, but
what is different
about the girling 60's.  Thanks in advance.

cya,
John
90q20v  
_____________________________________________________________
jstevens@kaiwan.com		    Orange County, California
johnstevens@ucsd.edu		Multimedia Development Center
La Jolla, California	University of California at San Diego

Prev by Author: Electrical woes
Next by Author: 90q20v spark gap
Prev by thread: Re: better braking for the 90
Next by thread: Rattle followed by white smoke!
Index(es):
- Author
- Thread