Re: window motor

[Martin Slotterback <zing@mail.lm.com>]

Jon Meckem wrote:
> 
> hello all, I have another question...  I seem to have a bad motor for the
> rear window in my 5000.  It went down but would not go back up.  I have
> everything disasembled except the lower bracket that mounts into the plastic
> cradle that the window rests on.  I am assuming the whole cable and motor
> mechanism need to come out as one piece.  Does anyone know how this lower
> mount seperates from the plastic window mount?  I am still waiting for a
> Bentley to show up in the mail, so any help would be much appreciated.
> 
> Jon
> 
> Miami, FL
> 
> P.S.  I am still looking for the gold paint that was used on the alloy
> wheels for the ur-quattro and early 5k turbos.


Hey,


   Well the window motor is bolted in with three rubber mounts, the
track is bolted in with four bolts {two at the top and two at the
bottom}, then there is a "C" clip at the back of the window mount. The
clip backs up a nylon washer and a rubber one.  Unplug the power wire,
and sort of fold and remove the regulator from the door panel.



   Good luck,


    Oh I might have some parts if you need some.


    Marty S.