[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Turbo Idle screw: To seal or not to seal? That is the question.

To: quattro@coimbra.ans.net
Subject: Turbo Idle screw: To seal or not to seal? That is the question.
From: Leah and David Mueller <muellerl@cadvision.com>
Date: Mon, 16 Jun 1997 20:22:19 -0500
Sender: owner-quattro@coimbra.ans.net

The Haynes manual indicates that idle screw on a 865kt should be sealed.
Mine is not and turning it affects idle to a small degree one way or
another.  In my attempt to find a vacuum leak it seems that there might be
one around this screw. I have to check more closely.  Should this screw be
resealed in some way or not?

Thanks for all your continued help.

David

Follow-Ups:
- Re: Turbo Idle screw: To seal or not to seal? That is the question.
  - From: Orin Eman <orin@WOLFENET.com>

Prev by Author: Bucking Bronco at 5000rpm
Next by Author: Resitance for warm up valve on 86 5kcdt?
Prev by thread: 86cst FS/parts
Next by thread: Re: Turbo Idle screw: To seal or not to seal? That is the question.
Index(es):
- Author
- Thread