Re: Ur-q "no start" questions

[Huw Powell <human@nh.ultranet.com>]

-- [ From: Huw Powell * EMC.Ver #3.1a ] --

> ...(Steve Early)...1983 Urq...Turns over fine, but no spark. 
> Here's what he has tried-
> 	1. Swaped ECU, no change.
> 	2. New hall sensor, nothing.
> 	3. Checked timing, nothing either.
> 	4. Checked ignition switch, nadda.
> 	5. Coil, same thing nadda

Voltage (input) at coil?  
Especially *while* cranking?  (this can drop to 8 or 9 volts or worse -
could be a starter/solenoid problem)
Rotor and cap condition?

Huw Powell
HUMAN Speakers
http://www.thebook.com/human-speakers