Angle Wrench, Tool US2598

[KSMITH1@mailgw.sanders.lockheed.com]

To conclude a hanging thread on door hinge bolt tool, tool US2598 is 
an "L" shaped box wrench (spanner), with the plane of the "L" in the 
plane of the 13 mm box wrench end.  Cris Semple's suggestion to bend 
an off-the-shelf straight wrench might have led to difficulty, bending 
in this plane.  However, one could always weld up whatever tear 
occured performing the bend.  In any case, at the time I did not know 
the actual wrench configuration.  

To clarify the above description, below is some ascii art.

              ____________
              |
              o
             
I was able to obtain one from Zelenda tools, $25.00 (US) including 
shipping.  Considering the value of potential time with a torch, I 
found this cost reasonable.

***                 ...Kirby    (Kirby A. Smith)                 ***
***                      2 X 1988 90q                            ***
***              ksmith1@mailgw.sanders.lockheed.com             ***
***              [=]   kirby.a.smith@lmco.com                    ***
***  Opinions expressed herein are entirely those of the author. ***