Re: Boge TurboGas on your 5k (was '89 200TQ + Boge + bushings (long))

[Igor Kessel <e6941tb@ix.netcom.com>]

Paul Caouette wrote:
> 
> Steinbru@VNET.IBM.COM wrote:
> >
> > Hello all.  Great to be back!  (but it was great to be away too!)  I
> > have just put Igor's drawing of the modifications needed to use
> > Boge TurboGas 32115F on the rear of your type 44 chassis Audi's
> > (5000/200/100).  Thanks again Igor, great write up!  --Gary
> >
> 
> Gary/Igor
> 
> Many thanks for the great spec. Wow! Pictures of the necessary mods!

Glad it proved to be useful.

I checked out the site today. I should've used thicker lines and a bigger font for 
dimensions, they look kinda blurred even on my 17" Sony Trinitron with resoluion set at 
1280x1024. Oh well, next time, perhaps.

BTW, does anyone with a web site use Micrografx Designer? Although Tango-PRO has some 
capacity for drawing (in order to do a mechanical layer and an assy drawing in PCB design),
next time around I'd rather use Micrografx and send a drawing directly, as an attachment.

> How about for the '83 TQC. Is this a shock I should be looking at?

Call Boge at 404-699-1131 and talk to Pete about your application.

-- 
Igor Kessel
'89 200TQ - 18psi (TAP)
'97 A4TQ - on the boat
Philadelphia, PA
USA