Re: Visor is falling

[Harley Cascio <harley@radix.net>]

My visor was suffering the same fate, though the fix is not that easy.  I
finally put it to rest (by cutting into it).  If I have lost some part of
my AUDI I need to know why.  There is a little clip around the plastic
attachment arm.  This smaller clip moves inside a larger clip(bith clips
are in a "C" shape).  The inner one has broken.
	Right now I am trying to find another clip, at hardware, craft and office
supplies stores (because it looks like one of those binder clips, the ones
that are black with the 2 silver loops to leverage the black part open).
This might be a little much for a simple replacement, but as my father who
grew up during WWII says, "Use it up, wear it out, make it do or do without".

Harley


At 09:41 PM 8/24/97 -0700, Scott M. wrote:
>Duane,
>
>There is a service bulletin that recommends removing the
>two screws that hold the visor pivot base, remove the
>visor, rotate the base  180 degrees and re-install. I have
>never tried this method to tighten up a loose visor but
>give you might want to give it a whirl.
>
>Cheers
>Scott M.
>89 200TQ
>
>> For all you 5K owners:
>> Is there a 'quick fix' for the falling/sagging driver's
>side sun visor?  ('87
>> 5KTQ)
>> 
>> TIA,
>> Duane
>> San Diego
>
>