Pressure Bleeder, ready made (almost)

[Dave Conner <conner@grinten.cfm.ohio-state.edu>]

I saw a slick approach to building a pressure bleeder posted on a BMW
related newsgroup awhile back.  Can't remember exactly where.  The idea is
to use a small garden type chemical sprayer to pump brake fluid thru the
system.  I think a 2 liter poly tank type would be a good one to try.  One
where you could see the fluid level.  You would attach the hose to the
brake reservoir cap...schraeder valve w/guts removed would probably work.
Pour brake fluid into the poly tank and use the built-in hand pump to
pressurize it.  I haven't tried this yet but really like the approach for
it's simplicity and low cost.  Nearly everything is already assembled and
one would have good control of the pressure.

bye,
Dave C.
David Conner  Columbus, OH 
'87 5KS,  '89 100E, both w/ Boge TG
'86 4KCSQ w/Koni's & freeflowin' exhaust...Yeee Haaa!