Re: A\C problem

[Elliott Potter <epotter@abraxis.com>]

This is actually very interesting.  In the dealer's last attempt to fix
the A/C, they did some re-wiring of the control head that they do on
1996 A4's.  The effect that this had was that after you turn on the car
it takes about 4 or 5 seconds for the climate control display to light
up, and when it does, it's set at 71 degrees F with the A/C on (if the
A/C is working, that is).  Could this be related to an incorrect Basic
Setting?

Thanks,

Elliott

>
>The "Basic Setting" on Audis it's VERY IMPORTANT.All ECM(Engine Control
>Module,Air Bag,A\T Control Module,A\C Control Module etc)Use in any form
>the input an output from the VAG 1551/2 scan tool to perform the process
>that could call "learning adaptation".When uses the VAG 1551/2 in this
>case on A\C control unit the scan tool moves all flapper to "adapt" the
>original position between the higther point to a minimun point, taken a
>position in relation to each other(sound a little complicat).The problem
>is that the scan tool are very expensive if you only work with your car
>only,but in a long way it pay itself(only if you stay w\Audi)