[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Fuel Distributor Rebuild?

To: Russell S Southerlin <Russell.S.Southerlin@lmco.com>
Subject: Re: Fuel Distributor Rebuild?
From: turbo@steelcity2.steelcity.net
Date: Wed, 15 Oct 1997 17:28:06 -0400
CC: IPM Return requested <quattro@coimbra.ans.net>
References: <03D7A34439F67267*/c=us/admd=telemail/prmd=mmc/o=den/ou=ccmail/s=Southerlin/g=Russell/i=S/@MHS>
Reply-To: turbo@steelcity2.steelcity.net
Sender: owner-quattro@coimbra.ans.net

Russell S Southerlin wrote:
> 
> All,
> While troubleshooting my fuel prsssure problems I did a stupid thing. I
> took my fuel distributor apart. I think I have my pressure problems fixed
> but now the fuel dist. is leaking. I think I've seen some threads on this
> and was wondering if they are rebuildable. There isn't that much to them.
> 
> TIA
> Russ
> 87 5KTQ
	I did this once and used Loctite brand #290 to seal the dist halves.Use
very little and be sure to line up the parts correctly,there is a little
hole in the center plate,watch for this.
turbo

References:
- Fuel Distributor Rebuild?
  - From: Russell S Southerlin <Russell.S.Southerlin@lmco.com>

Prev by Author: Re: no power to fuel pump
Next by Author: Re: Turbo donor?
Prev by thread: Fuel Distributor Rebuild?
Next by thread: Re[2]: Fuel Distributor Rebuild?
Index(es):
- Author
- Thread