Re: Cooling system leak(s) - 5KCSTQ

[turbo@steelcity2.steelcity.net]

Mark Pollan wrote:
> 
> Hi:
> 
> I'm trying this under a different subject to see if it piques more
> curiosity/responses.  Previous subject was "cooling system crusties".
> 
> Briefly, I am getting leakage from just about every junction.  Since
> replacing the after run relay (pump works now) I got a leak at the
> connector end of the pump.
> 
> 1)  Is it possible that the cap on the overflow is defective and holding
>     _too_ much pressure in the system thus causing leaks?
> 2)  Anybody know what outside diameter PVC pipe I can use to bypass
>     the turbo pump as I try to seal it?
> 
> I promise I will use proper cooldown procedures when the pump is bypassed.
> 
> Any and all responses greatly appreciated.
> 
> Mark Pollan, '86 5KCSTQ, 238K Miles
	Either replace the cap or have it tested at your local repair shop.
turbo