Re: G-60 calipers for sale

["Bruce Bell" <bbell@bbell.com>]

I believe Todd Candey has brackets available that work with
the 4Kq front struts which will allow the use of the G60
calipers. another alternative is to use the front struts
from any 5 cyl (or late 88+) Audi 80/90 as the calipers
will directly bolt to this strut housing. You will either
need to get the 5ktq rotors drilled for the 4x108 pattern
or convert to 5 bolt hubs. Other Issues there, but I have
most solved accept for which rear rotor to use. Any one
know of a 245x10 5 bolt rear rotor with a 30 mm hat size?

Bruce
Mine's ('87 4KCSq) an AAN to be with coil overs and 5 bolt
hubs if I can find that elusive rear rotor.

bbell@bbell.com

> I have no idea if this will work on a 4kq.  It's been too
long since I owned
> one to remember.  I think it is a bigger deal than just
drilling the rotors.
> You will have to have a custom carrier machined.  Other
wise, I think that
> my friends up here in the PNW with the turbo motors in
their 4kq's would
> have already done this swap.  Anyone care to enlighten
us?