Re: UrQ Blowoff Valve

[Igor Kessel <e6941tb@ix.netcom.com>]

Scott and Dave wrote:
> 
> > and the turbo inlet 3) tap the small metal right angle "hose"
> > that connects the accordian hose with the turbo inlet. Anyone
> > have any thoughts here?
> 
> I have had a 90 elbow replacement fabbed like you describe.
> Not currently on the car, but has been installed before. I also
> had a similar i/c oulet to throttle body pipe fabbed at a muffler
> shop with the outlet port, just like the stock hose. Use a T and
> send some air back to the WG and some to the bypass valve.

And I thought I was the only one crazy enough to have a local Meineke
fabricate an IC to TB substitute out of a 2.5" exhaust pipe. I mounted it
using the rubber flanges from the blown OEM accordeon hose.

Did not like the setup, though. Replaced it with a Samco hose.

-- 
Igor Kessel
'89 200TQ - 18psi (TAP)
'98 A4TQ - on order...again. For the third time and counting.
Philadelphia, PA
USA