Clutch MC replace

[Joel Skousen <jskousen@enol.com>]

Brit #3 (paul says):

<There was one washer that I never managed to fit - I couldn't hold it
in 
place with  a long-nosed pliers AND apply force AND fit the final clip
into 
position as there was only room for two fingers in this space.  I also 
couldn't really see what I was doing.>

Reply:
	If you unscrew the actuating rod from the clevis pin, you won't have to
try and put the circlip in place with your fingers--you can easily pull
the whole MC out with actuating rod attached (after removing to two
allen bolts) and rebuild it on the bench.  I've done 2 or 3 in less than
an hour each.  HTH  Joel