Re: '91 200 radiator removal?

[crossley family <crossley@northwest.com>]

Wolff wrote:
> 
> I can't find instructions on this in the Bently, but my untrained eye
> says that the A/C condensor needs to be removed first to make room for
> the radiator to come out. Someone please tell me it isn't so...   The
> climate control works perfectly and I can only imagine that a drain and
> refill of the R-12 is going to have unwanted side effects. Also, is
> there a known all metal replacement radiator, or should I go with OEM
> plastic and metal? The leak is at the front motor side seam.
> Wolff

Wolf,
Although I haven't actually done one myself, I'm sure the '91 200q
radiator will come out without disturbing the AC system.  I just
completed changing the rad on my '91.  I found that an all-metal unit is
not directly available but can be obtained by modifying a Modine or
other metal unit designed to fit the pre '91 200q.  The radiator shop
that I used supplied the radiator for $200 and modified it with two
additional nozzles for about $50.  I can supply you with their address
if you are interested.  They apparently do a lot of new car dealer
related stuff and ship things all over the country. I have known the
owner for 20 years or so and believe him to be honest.
Happy Holidays!
 Kent Crossley, Portland,Or.
'91 200q (mine)
'93 90CSq (hers)