Re: MAC11b ECU Trials & Tribulations

[four.rings@MCIONE.com]

Douglas Hurst Quebbeman wrote:

> So, I put back in the salvaged ECU, but oops, I think I bent that
> transistor a little too far, yup, snapped off an NEC C2334
> into my pissed-off fingers.
> 
> The little bugger crosses over to a TIP 41C, but wouldn't you
> know it, NO electronics stores open Friday or Saturday other
> than ReamMe O'Shack, for whom a TIP 41C is a special order
> part.

Doug,

I am looking into my faithful bible, "Philips ECG Semiconductor
Replacement Guide", which has never ever let me down.

C2334 crosses over to ECG54 (TO-220, high speed, NPN, Si, f=70Mhz,
gain=100)
TIP-41C crosses over to ECG331 (TO-220, high speed, NPN, Si, f=3Mhz,
gain=40)

I think you need an ECG54, not ECG331 (or TIP-41C).

I ransacked my stash of transistors here at home and found one D866B,
which also crosses to ECG54. E-mail me your snail-mail address and I'll
Scotch-tape it to a postcard and stick into envelope and mail it to you.
Also, If you wish, I can make copies of my ECG, NTE and SK
Cross-references on 3.5" floppies and mail them to you as well. Sure
beats leafing through a dog-eared paperback catalogue.

-- 
Igor Kessel
'89 200TQ -- 18psi (TAP)
'98 A4TQ -- FINALLY!
Philadelphia, PA
USA