Re: ?'s on 93 90csq

["Fred Munro" <munrof@isys.ca>]

I had the same problem with my '91 200q. The switch on the 200q is snapped
into the socket and can be removed quite easily. I bought a12V mini bulb
from an electronics store and replaced the one in the switch. It's a fairly
simple job - you have to take the switch apart and solder in the new bulb.
Mine works fine.


                                Fred Munro
-----Original Message-----
From: Mark Granoff <Mark.Granoff@Software.com>
To: HOOKSA <HOOKSA@aol.com>; qlist <quattro@coimbra.ans.net>
Date: Tuesday, January 06, 1998 2:16 PM
Subject: Re: ?'s on 93 90csq


>At 12:01 AM 1/2/98 EST, HOOKSA wrote:
>>I recently purchased a 93' 90csq and was wondering a few things.  I have
>>abublb out behind the switch for the pass. seat heater switch.  Is there a
>>simple way to  replace it w/o tearing the dash apart.
>
>I had the same problem in my '94 90CSQ (acquired last July). Since I bought
>it from a dealer, they replaced it under warranty.  As I understand it, the
>bulb is not easily replaceable because it is soldered into the switch. You
>have to replace the whole switch, OR follow a detailed procedure which
>you'll find int he Quattro Mailing List archives (somewhere):
>http://coimbra.ans.net/quattro.html .
>
>Good luck.
>
>-Mark
>--
>Mark H. Granoff                                 Mark.Granoff@Software.com
>      Software.com, Inc. - The Internet Infrastructure Company (tm)
>                 91 Hartwell Avenue, Lexington, MA 02173
> Phone: +1.781.274.7000 x226, FAX: +1.781.674.1080, W3: www.software.com
>   PGP Fingerprint: 972F E868 46A1 B1A5 6FB1  B236 03C3 F38A 0B03 C2E8
>Disclaimer: Opinions expressed herein are not necessarily Software.com's.
>