K26 turbo onto MC with K24...what will happen?

[Gerard <gerard@poboxes.com>]

Hi!

Got a source for Audi parts, a backyard job thing but with a guy who
is also a Audi fan. He has several turbo units lying around, some
actually still attached to motors :). (Now at least I know where 4-5 of
the South African Audi Turbos are). He has some K26 turbos which were
fitted  to the early cars with the lower compression ratio. I still need
to check properly, but the MC engine I'm running in my 200t is a
high compression engine with the K24 attached.  I was just wandering
that if the rumble sound in my car is coming from the turbo and I
will need to replace it then would it be a good idea to fit the larger
K26 into the K24 position while maintaining the compression ratio in
order to do a power increase? Anyone  running the 8.2:1 (or is it
8.4:1) compression ratio MC motor with the K26 turbo?

G.
-- 
"a thousand miles from here, there is another person smiling"
1990 Turbo (200T)
name   : gerard van vught
tel    : +27-57-912 2658 (w) / 082 923 9609 (cell)
url    : http://www.acenet.co.za/homepages/gerard/
e-mail : gerard@poboxes.com  / han.solo@galaxycorp.com
         gerard@acenet.co.za / van_vught@frg.issi.co.za