Re: Various

["Jouko Haapanen" <joukoh@vtoy.fi>]

Phil,

>From the "Original Volkswagen und Audi Teile Spezialkatalog 1992 -
Normteile"

AM8x1  (A:   z.B. Gewinde annähernd bis Kopf)
CuZn: Kupfer-Zinc (Messing)
C350: Glanzverzinkt, gelblich chromatiert
part number N 016 158 1

I think this is what you may need...

Jouko Haapanen
Pori, Finland




-----Original Message-----
From: Phil Payne <quk@isham-research.demon.co.uk>
To: quattro@coimbra.ans.net <quattro@coimbra.ans.net>
Date: 11. tammikuuta 1998 00:31
Subject: Various


>Thanks for the emails, guys - I've so far had 26.  Since they were much the
>same in tone,  I won't quote any.  Except perhaps Doug Quebbeman's ...
>
>No, I mustn't.
>
>On another subject; the ur-quattro has a venting plug on top of the main
>radiator - it's an M8 x 1.0mm brass bolt with a flat ground on one side of
the
>threaded portion.  Mine has been screwed in cross-threaded, and now has no
grip
>at all.  I've turned down and threaded an old M10 bolt for now - but I
can't
>find a source of M8 x 1.0mm (so-called 'metric fine') anywhere.
>
>It wouldn't be so bad - but the spares microfiche doesn't mention it.
There is
>a perfectly good drawing of several ur-quattro radiators - but none have
bleed
>vents.
>
>Anyone got a VAG/Audi part # for this thing?
>
>--
> Phil Payne
> Committee Member, UK Audi [ur-]quattro Owners Club
>