Re: Inlet Manifold Gasket

[Dave Head <dhead@sundial.net>]

At 04:06 AM 1/12/98 -0500, you wrote:
>
>     Does anyone have any recommendations on removing an inlet manifold 
>     gasket which is bonded to the head. So far attempts have included 
>     using a putty knife and applications of WD40 and Carb cleaner, all 
>     with very limited success. I was considering using a small gas torch 
>     to try and loosen up the gasket sealant?

Go to NAPA/Pep Boys - they sell a spray gasket remover - works like oven
cleaner.

********************************AUDI FAN***********************************
                                   EMCM(SW) Dave Head  
87 5KCStq 215K miles                1.85 or so... bar 
    qcusa #3442           Maitland, Florida     plate: STLTHTQ
******************************************************************************