RUST

["Shane Allen Snyder" <snyders2@pilot.msu.edu>]

My Audi is suffering from some ugly surface rust in the usual places.  In
October, I sanded the areas as best I could without removing trim pieces.  I
applied 3 coats of primer and 3 coats of paint.  Still, in about 50% of the
areas, the rust as returned worse than before.  I would appreciate some
suggestions on how to get rid of this rust for good (or atleast a few years).
I have heard about products that convert the rust to a stable form.  Any
suggestions would be greatly appreciated!!!


--

*---> Shane Snyder (snyders2@pilot.msu.edu) <---*