Re: 5000CSQT idler pully

[Wolff <wolff_b@ix.netcom.com>]

Phoenix wrote:
> 
> OUr 5000CSTQ is being rebuilt.....however, Ray has had problem after
> problem and I want this car fixed and OUT OF THE GARAGE!
> 
> The bolt that holds the timing belt idler pully snapped off.  

Did someone try to use the bolt to pull the idler home? This is a no-no
as you found out. If you can get the idler seated properly, then you
shouldn't need much torque to hold it in place. Bentley says 7ft.lbs.
HTH,
Wolff