Re: Lifting & Lighting

[Huw Powell <human@nh.ultranet.com>]

> 1) I've got a bulb out in the instrument cluster, and I've figured out how
> to remove the strip under; the cluster as well as the screws that hold it
> in. The whole cluster is then loose, but it does not move very far. I'm
> afraid to apply pressure until I hear from one of you. Any suggestions?

Sounds like your speedo cable is still attached?  Peer around at it,
there should be a thumb collar nut about 3/4" in diameter screwed to the
back of the cluster.  Squeeze your fingers in a loosen it.  The the
wiring harnesses will need to be disconnected.  Voila! - cluster in your
hands ready to work on.

hth

-- 
Huw Powell

http://www.thebook.com/human-speakers

82 (+/-) Audi Coupe