Re: retrofitting headlight washers

[frankbauer@thevine.net]

jim sez:
>the supply pipe has to be in the region of 10mm id
the stock audi is at least 8mm

>the pump has to have real power
i haven't had the pump out, but i think it's the same as the ws pump

>the jets too have to be able to deliver the
>water, little pin-prick ones are useless, they need to be something like
>4mm.
the jets are 2 slits (per headlamp) about 3mm x 1mm each

frank

to: IN:jim_haseltine@email.msn.com
cc: IN:quattro@coimbra.ans.net