How do ya' get those wiper arms off ?

["Mike Del Tergo" <mdeltergo@hotmail.com>]

Kurt Wesseling said,

>Hi folks...
After I pulled the nut that holds the arm down, it still didn't want to 
come off.  Can't very well pry on the things. < 

Shows how much you know:^) Got a pry bar!
The arms are spring loaded and need to be slightly levered.  I raise the 
arm to 90% then pry up the side opposite the arm with a channel lock 
(insert favorite misapplied tool here)  I suppose a smallish gear puller 
would be perfect.  The arms and posts are grooved very finely so NO 
rotational twisting here just up & down levering/lifting.
HTH
Mike
call if you need an even shorter cut than Eric's patented steak knife 
R&R of blower motor

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com