Re: Seals on brake cyclinder

[Sachelle Babbar <sbabbar@iris.nyit.edu>]

Pull the resovoir straight up. It must be straight! Pull the seals with
needle nose pliers or whatever. Put new ones on. Push res straight down.
Would help to put a couple of drops on the seals. Might as well clean the
mc while it's out. If it's leaking alot, do what I did and tie wrap the
front *AND* back of the m/c tightly. It'll buy you time.

**************************************************************************************************************************************************							       
*Steve                                       Sachelle Babbar
*'84  5ksT 1.6-2.0 bar                    <SBABBAR@IRIS.NYIT.EDU>
*Cockpit adjustable wastegate, AudiSport badge
*
*Disclaimer:"Any information contained herein is based purely on my own
*personal experience and may not necessarily reflect yours. Use caution as
*your results may vary from mine."
********************************************************************************

On Tue, 17 Mar 1998, Jkrd wrote:

> I need help,could someone please tell me how to replace the master
> cyclinder seals in my 1986 5000 CS Quattro.
> I have a massave leak of brake fluid and need to know how to change these.
> Can someone HELP !!
>                                                                            
>                Joan
> 
>