Re: Couple of problems w/86 CGT

[J4KQ4me <J4KQ4me@aol.com>]

Ditto that comment on engine flushes. If you are keeping up with your oil
changes and using ONLY an Audi filter, you wouldn't need those flush things.
Anyway your cam runs directly in the head. There aren't any cam bearing in the
classical sense, so you don't really need to worry about that. I would just
change the oil again, and screw on an Audi filter.
Did you check for bent wheels? Also, that play you speak of is work upper
strut mountings.
Good luck!
jon.