Re: Weird CIS behaviour

[Russ Southerlin <russell.s.southerlin@lmco.com>]

Smitty Wrote:
The accumulator has a diaphragm assy inside it that enables it to retain
the pressure along with the check valve.Bad accumulators/diaphragms can
be checked by removing the small screw on the "back" side of the unit.If
ya gets gas outta ther,It "haint no gud".

Smitty

I get some fuel out of the screw in the back of the accum.(a couple of
dribbles) but I have real good residual pressure (40-45psi after 10 min.
and 35-40 overnight). Could the accum. still cause hard starting
problems even though it appears to be holding pressure?  I had hot start
problems solved for a couple of months but now they are back!!!!!!

Russ
87 5KCSTQ
Littleton, CO