turbo cooling line

[cyclops@mindlink.bc.ca (cyclops)]

steve a quick fix that i use when adapting lines is to wrap some copper or
steel wire around the cleaned extremities of the insert tube. i then braze
or solder these on. they act as a lip to stop the hose and clamp from coming
off. i haven't lost a hose yet. if you are soldering, use a silver based
solder (because of its mechanical strength), acid paste flux and a 40 watt
or larger iron. don't use a soldering gun. the flux residue washes off with
boiling water.
mike
86 5kcdtq